The clamp-on design eliminates the need to drill bus bars and makes for a much safer, reliable connection via a standard 4 mm socket. The G Clamp can be tightened by hand when wearing PPE gloves, eliminating the need to use tools in the bus bar chamber.

Two variants are available, a fused and unfused variant. The fused variant has the advantage of providing a fuse at the point of contact but is physically slightly larger than the unfused one. The fuse used are of the HBC type 6.35 x 32mm.

The insulated materials reduce the hazard to the operator and the spring loaded contact pin and locking ring ensure reliable results throughout extended logging periods.The clamps conform to BS EN61010 and have an Installation Overvoltage Rating CAT IV 600V.

Available in Brown, Black, Grey and Blue.